Products

The DVS urinal control range has been designed and developed over years of experience working in washrooms. The units are easy to install and extremelyversatile in their operation.
 
DVS supplies a range of urinal controls for individual or multiple station urinals. Variable settings allow adjustable time delays between flushing, providing maximum efficiency and savings. Optimum solutions are available to suit every application.
 
The Flushmatic urinal control is used for multiple station urinals and can be surface or ceiling mounted. This works by using a passive infrared (PIR) detector which detects movement within the “sensing area”, switching the unit into a timing mode.
 
 
After a pre-set time, the solenoid valve opens allowing water to flow into the cistern activating the flushing cycle.
 
The fill-time for the cistern can be customized by the user using the appropriate
switches on the Flushmatic board. There is also a set of dip switches to adjust the time delay after activating the PIR.
 
The system's fast fill design helps eliminate scale problems associated with slow or drop fed systems.
 
An automatic "janitorial" flush every 12 hours is also programmed into the unit, should the system not be used during that time.
 
The individual sensing urinal control systems are designed to detect individual users and only flushes when the user walks away.
 
DVS offers kits for single or double bowl requirements.
 
Common Features:

• Up to 80% savings on water costs
• Extremely reliable
• Low maintenance
• Low power consumption
• Plastic Solenoid valve
• Mains or Battery operated
• Adjustable fill time (15 mins max)
• Adjustable delay time
• Janitorial flush (After 12 hours of non-use)
• Service contracts available

HOW THEY WORK
DVS supply a range of urinal controls for individual or multiple station urinals. Optimum solutions are available to suit every application.
 
The Flushmatic urinal control is used for multiple station urinals and can be surface or ceiling mounted. This works by using a passive infrared (PIR) detector which detects movement within the ‘sensing area’, switching the unit into a timing mode.
 
After a pre-set time, the solenoid valve opens allowing water to flow into the cistern activating the flushing cycle.
 
The fill-time for the cistern can be customised by the user using the appropriate switches on the Flushmatic board. There is also a set of dip switches to adjust the time delay after activating the PIR.
 
The system’s fast fill design helps eliminate scale problems associated with slow or drip fed systems. An automatic ‘janitorial’ flush every 12 hours is also programmed into the unit, should the system not be used during that time.
 
The individual sensing urinal control systems are designed to detect individual users and only flushes when the user walks away.
 
DVS offer kits for single or double bowl requirements.

Flushmatic - Surface Mount
The standard Flushmatic is a wall or ceiling ‘surface mounted’urinal control for multiple station urinals.

Special Features
 - Timed urinal flushing
 - Valve open button
 - Ceiling or wall mountable
 - Available in mains or battery
 - Battery low detection and indication (optional)

Pearl
The Pearl is a suspended ceiling urinal control for multiple station urinals. This unit is the size of a mini-downlighter and incorporates low battery indication.

Special Features
- „Occupancy detection and indication (indicated by a flashing green light)
- „Battery low detection and indication (indicated by a flashing red and green light)
- Valve closed before battery failure (indicated by a flashing red light until total battery loss)
- Timed urinal flushing
- „Valve open button
- „Available in mains or battery

Flushmatic - Downlighter
The Flushmatic downlighter is a suspended ceiling urinal control for multiple station urinals.

Special Features
„ - Flush ceiling mounted
„ - As Surface Mount Flushmatic (except fitting)




Individual Control System
The individual operation urinal control system can be supplied for single or double station urinals. Standard sensor comes with 50mmø bezel.

Special Features
„ - Single or double station urinal flushing
„ - Only flushes when user walks away from urinal
„ - Mains power only

Our range of urinal controls are suitable for individual or multiple station urinals.
Optimum solutions are available to suit every application.
 
Major clients include:
- „Ministry of Defence
„- Tesco
„- BAA Airports
„- Road Chef
- „Local Authorities
- „Marks & Spencer
- Urinal controls